Description

Butyl Acrylate Monomer (BAM) is used in paints, sealants, coatings, adhesives, fuel, textiles, plastics, and caulk. We have imported Material as well as Indian Material readily available in stock.

It is highly reactive and polymerizes easily when exposed to heat or peroxides; therefore, commercial preparations may contain a polymerization inhibitor. It reacts easily with strong acids and bases, amines, halogens, hydrogen compounds, and oxidizers. It is designated a Class II Combustible Liquid. It can be stabilized with hydroquinone or hydroquinone ethyl ether.

People can be exposed to this product via breathing it in, skin absorption, swallowing it, or eye contact. Symptoms of exposure include irritation of the eyes, skin, and upper respiratory tract; sensitization dermatitis; cornealnecrosis; nausea; vomiting; diarrhea; abdominal pain; cough; sore throat;pulmonary edema; and difficulty breathing (dyspnea).

Specifications:

• IUPAC name : butyl prop-2-enoate
• Other names : n-Butyl acrylate monomer (BAM), Butyl ester of acrylic acid, Butyl-2-propenoate

Identifiers :

• CAS Number : 141-32-2
• ChEBI : 3245
• ChEMBL : ChEMBL 1546388
• ChemSpider : NA
• EC Number : 205-480-7
• KEGG : C10921
• PubChem : 8846
• RTECS number : UD3150000
• UNII : 705NM8U35V
• UN number : 2348

Properties :

• Chemical formula : CH₂=CHCOOC₄H₉
• Molar mass : 128.2 g/mol
• Appearance : Clear, colorless liquid
• Odor : Strong, fruity
• Density : 0.89 g/mL (20°C)
• Melting point : −64 °C; −83 °F; 209 K
• Boiling point : 145 °C; 293 °F; 418 K
• Solubility in water : 0.1% (20°C)
• Solubility : Soluble in ethanol, ethyl ether, acetone,carbon tetrachloride (slight)
• Vapor pressure : 4 mmHg (20°C)

Hazards :

• R-phrases : 10-36/37/38-43
• S-phrases : 2-9
• Flash point : 39 °C; 103 °F; 313 K ^[1]
• Autoignition temperature : 267 °C^[2]
• Explosive limits : 1.5% – 9.9%
• Lethal dose or concentration (LD, LC) : NA
• LD50 (Median dose) : 1800 mg/kg (dermal, rabbit)[3]
• LC50 (Median concentration) : 1000 ppm (4 hr)[3]
• US health exposure limits (NIOSH): NA
• REL (Recommended) : TWA 10 ppm (55 m)