Polyisobutylene is also commonly called as butyl rubber. Polyisobutylene 950 (PIB 950) is most popularly used synthetic elastomers. This Polyisobutylene 950 (PIB 950) is colorless, high resistant to acids & non drying material. We are leading importers & suppliers of this Polyisobutylene 950 (PIB 950) in India & our primary objective is to server with best quality Polyisobutylenes to our domestic & International customers along with unmatched after sales support. This Polyisobutylene 950 is a non volatile liquid & it possesses a very stable performance properties. It has a very good compatibility with Paraffin Wax & PE. This material is absolutely non soluble in water. Polyisobutylene 950 (PIB 950) gives a really good tact to the formulations where its used. If you require any other grades with different molecular weight, they have been mentioned below. The prices of this product varies from grade to grade. Usually HR Grade prices are on a higher side. Importing Polyisobutylene’s in ISO Tanks is a bit economical as compared to the smaller packing.
Features of Polyisobutylene 950 :
Various Molecular Weights Available
Stable Performance
Non Volatile Liquid
Excellent Thickening Property
impermeable to Gases & Vapour
Low Molecular Weight
Good Electrical Insulation
Excellent Resistance to UV Rays, Acids, Heat & Weather
Good Hydrophobicity
Excellent Shear Performance
Applications :
As a tackifier
2T Oils
Lubricating Grease
Can be blended with rubber to get higher melting points
Drawing Oils
Modifications of ASPHALT
Insect / Rat Traps
Adhesives
Streatch Wraps
Quenching Oils
Hot Melt Adhesives (HMA’s)
Pressure Sensitive Adhesives
Solvent Based Adhesives
Low Molecular Weight Dispersants
Hot Melt Sealants
Master batches
Viscosity Index Improver
Gear Oils
Specifications of Polyisobutylene 950 (PIB 950) :
Molecular Weight : 950
Flash Point in PM : 165 ℃
Flash Point in COC : 200 ℃
Color (AHPA – ASTM D1209) : 15
Pour Point : -1 ℃
Water (wt-ppm) : 30
Acid Value : 0.01 mgKOH/g
Heating Loss : 0.18 Wt-%
Sulphur Content : 1 Wt-ppm
Density (GPC) : Max 2.5
Viscosity @ 100℃ / 40℃ : 220 / 7200
Other Grades :
1300
2400
Contact us for any other special grades with different molecular weights
Are Samples Available ?
As far as Polyisobutylene 950 (PIB 950) is concerned, it is a very viscous material. So no samples are available as the handling of the same is not convenient.
You can contact us on the above email id for Technical Data Sheets & test report of the material.
Handling, Packaging & Storage :
180 Kgs Original Intact Open Face Metal Barrels
Recommended to be stored in dry , ventilated & clean warehouses
View Comments